Description
3/4" BSP Triple Outlet Plastic Water Solenoid Valve – RPE T90
The RPE T90 is a compact triple-outlet plastic water solenoid valve designed for automatic water filling and distribution in domestic washing machines, commercial laundry equipment, dishwashers and OEM appliance systems.
Featuring a common 3/4" BSP male threaded inlet and three independently controlled solenoid valves, the T90 provides reliable water flow control through three 90° hose tail outlets. Its compact nylon construction makes it suitable for appliance replacement and equipment requiring multiple water filling functions.
Each outlet is operated by a separate 2/2 way normally closed, pressure-assisted solenoid valve. When electrical power is removed, the corresponding valve closes automatically, helping prevent unwanted water flow.
Operating from 0.2 to 10 bar, the RPE T90 provides a practical solution for mains-pressure water supply systems where independent control of three water outlets is required.
Triple Outlet Solenoid Operation
The RPE T90 incorporates three independent normally closed solenoid operators within one assembly.
All Coils OFF → All three outlets closed.
Coil 1 ON → Water flows through outlet 1.
Coil 2 ON → Water flows through outlet 2.
Coil 3 ON → Water flows through outlet 3.
Multiple Coils ON → Two or three outlets may operate simultaneously, subject to the available inlet pressure and water supply capacity.
The pressure-assisted design requires a minimum differential pressure of 0.2 bar for reliable operation.
This arrangement allows an appliance controller to select individual water outlets without requiring three separate inlet valve assemblies.
90° Inlet & Outlet Connections
The T90 features a standard appliance-style threaded water inlet and three right-angle hose tail outlets.
- Inlet Connection: 3/4" BSP male thread
- Outlet Connections: 3 × 10mm hose tails
- Outlet Arrangement: 90° right-angle
- Valve Orifice: 11mm
The 90° hose tail arrangement helps simplify hose routing in compact washing machines and other water control equipment.
Compatible flexible hoses should be secured using appropriate hose clips.
Pressure & Operating Conditions
The RPE T90 is designed for automatic water filling and distribution applications operating within the following limits:
- Minimum Operating Pressure: 0.2 bar
- Maximum Operating Pressure: 10 bar
- Operation: Pressure assisted
- Valve Function: 3 × 2/2 way normally closed
- Suitable Medium: Water
The valve requires sufficient inlet pressure to operate the pressure-assisted mechanism and is not intended for gravity-fed or zero-pressure systems.
Nylon Construction
The T90 features a lightweight nylon valve body designed for appliance water control applications.
Construction highlights:
- Durable nylon body
- Three independent solenoid operators
- Common 3/4" BSP male inlet
- Three right-angle hose tail outlets
- Compact appliance-style construction
Combining three water valves in one assembly helps reduce the number of separate fittings and pipework connections required.
Electrical Coil & Voltage Options
The RPE T90 is available with several electrical supply options:
- 12V AC/DC
- 24V DC
- 24V AC
- 110V AC
- 230V AC
The product page also offers different coil power configurations depending on the selected voltage.
Each outlet is controlled independently by its own solenoid coil.
The existing product specification identifies Class F coils with a 60% duty rating.
The maximum continuous energisation period is two minutes, followed by a minimum three-minute cooling period.
This intermittent-duty limitation must be considered when selecting the valve for appliances requiring extended water filling cycles.
Approvals & Compliance
The existing product information lists WRAS, KTW and DIN 4774 approvals for the T90 Series.
Additional listed certifications include ACS, ENEC, CSA and NSF-related approvals.
The current validity and applicability of these approvals should be confirmed against the exact product configuration and manufacturer's certification documentation before specifying the valve for regulated potable water applications.
Typical Applications
- Domestic washing machines
- Commercial washing machines
- Dishwashers
- Laundry equipment
- Appliance water inlet replacement
- Triple-outlet water distribution
- OEM water filling systems
- Automated water dispensing equipment
- Commercial appliance manufacturing
- Industrial water filling equipment
Technical Specification
Manufacturer: RPE Srl
Model: T90
Product Type: Triple-outlet water solenoid valve
Valve Function: 3 × 2/2 way normally closed
Operation: Pressure assisted
Inlet Connection: 3/4" BSP male
Outlet Connections: 3 × 90° hose tails
Outlet Size: 10mm
Body Material: Nylon
Orifice Diameter: 11mm
Operating Pressure: 0.2–10 bar
Suitable Medium: Water
Voltage Options: 12V AC/DC, 24V DC, 24V AC, 110V AC, 230V AC
Coil Insulation: Class F
Coil Duty Rating: 60%
Maximum Continuous ON Time: 2 minutes
Minimum Cooling OFF Time: 3 minutes
Outlet Control: Three independently operated solenoids
Free next day UK delivery.
Related Products & Categories
