Description
3/8" PTFE Solenoid Valve for Chemical Dosing – UDC10TF
The UDC10TF is a 3/8" 2/2 way normally closed PTFE solenoid valve designed for controlling strong acids, strong alkalis and highly corrosive chemical fluids.
Featuring a PTFE valve body, PTFE sealing system and isolated dry-armature construction, the UDC10TF provides greater chemical resistance than the equivalent PVC-bodied UDC10. The manufacturer specifies the PTFE UDC-TF range with corrosion resistance from approximately pH 0–14.
The zero-pressure assisted-lift design operates from 0 Bar without requiring a minimum pressure differential. With a 6.5mm orifice, 4.7 L/min water flow at 1 Bar pressure drop and a 0–1 Bar operating range, the UDC10TF is particularly suited to chemical dosing, water treatment and aggressive process applications.
Valve Function & Operation
Function: 2/2 way normally closed
Operation: Assisted lift
Design: Isolated dry armature
Normal Position: Closed when de-energised
Energised Position: Open
Minimum Differential Pressure: 0 Bar
The manufacturer identifies the UDC and UDC-TF family as normally closed, dry-armature, assisted-lift solenoid valves operating from zero differential pressure.
This allows reliable switching in low-pressure and gravity-fed chemical systems where conventional pilot-operated solenoid valves may not operate.
Ports & Connections
Port Size: 3/8" BSP
Optional Thread: NPT
The 3/8" connection provides a compact installation for chemical dosing equipment, laboratory systems, water treatment equipment and OEM chemical handling machinery.
Pressure & Performance
Operating Pressure: 0 to 1 Bar
Minimum Differential Pressure: 0 Bar
Orifice: 6.5mm
Water Flow: 4.7 L/min at 1 Bar pressure drop
Maximum Media Viscosity: 20 cSt
Vacuum: Not suitable
Construction & Materials
Body: PTFE
Seals: PTFE
Diaphragm: NBR with PTFE coating
Solenoid Tube: Stainless steel
Armature: 430F stainless steel
Shading Ring: Copper
Coil Housing: Resin or metal
The PTFE body is specified with corrosion resistance across approximately pH 0–14, compared with approximately pH 3–11 for the PVC-bodied UDC range.
Chemical & Media Compatibility
Suitable for compatible:
✓ Strong acids
✓ Strong alkalis
✓ Hydrochloric acid (HCl)
✓ Sulphuric acid (H₂SO₄)
✓ Chemical dosing fluids
✓ Water-treatment chemicals
✓ Corrosive process liquids
✓ Compatible gases
The complete valve contains other wetted components in addition to the PTFE body. Chemical compatibility should therefore be confirmed for the actual media, concentration and operating temperature.
Temperature
Media Temperature: -5°C to +80°C
Ambient Temperature: -10°C to +40°C
Maximum Media Viscosity: 20 cSt
Coil & Electrical
Coil Type: M
Coil Power: 28 Watt
Insulation: Class F 155°C
Duty Rating: 80%
Electrical Connection: DIN 43650A
Protection: IP65 with connector fitted
Optional Connection: IP54 flying leads
AC Maximum ON Time: 2 hours
AC Minimum Cooling Time: 30 minutes
DC Maximum ON Time: 30 minutes
DC Minimum Cooling Time: 7.5 minutes
The manufacturer specifies 80% duty with different maximum energised periods and cooling intervals for AC and DC operation.
Voltage Options
12V DC
24V DC
24V AC
110V AC
230V AC
AC versions are available for 50 or 60Hz operation.
Typical Applications
✓ Concentrated acid dosing
✓ Strong alkali dosing
✓ Chemical dosing systems
✓ Chemical transfer equipment
✓ Water treatment systems
✓ Laboratory equipment
✓ Corrosive process control
✓ OEM chemical equipment
Why Choose the UDC10TF?
The UDC10TF combines a highly corrosion-resistant PTFE body and sealing system with isolated dry-armature construction and true zero-pressure operation.
Its PTFE body provides approximately pH 0–14 corrosion resistance, making it particularly useful for strong acids, alkalis and aggressive chemical media where a PVC, brass or conventional stainless steel valve may not provide suitable chemical resistance.
For less aggressive chemical applications within the compatibility range of PVC, the equivalent PVC-bodied UDC10 provides a lower-cost alternative.
Related Products & Categories
