Genuine nass magnet System 13/30 Solenoid Coil DIN43650A
Genuine nass magnet System 13/30 industrial solenoid coil with Ø14.6mm armature tube bore and DIN EN 175301-803-A Form A electrical connection.
The System 13/30 coil is widely used with Shako solenoid valves and other industrial valve manufacturers using the compatible nass magnet armature system.
Available in a wide range of AC and DC voltages, these thermoset resin encapsulated coils are designed for reliable 100% continuous-duty operation.
Suitable for replacement, maintenance and OEM applications across water, compressed air, oil, steam, gas and general industrial fluid control systems.
Optional LED, bridge rectifier and PWM energy-saving DIN connectors are available. PWM connectors can significantly reduce holding power and operating temperature on compatible 12VDC and 24VDC installations.
Dimensions
Coil system: 13/30
Coil bore: Ø14.6mm
Overall height: 42mm
Body width: 30mm
Body length: 39mm
Upper locating recess: Ø10mm
Electrical connection: DIN Form A
Electrical Specification
Manufacturer: nass magnet
Coil type: System 13/30
Connection: DIN EN 175301-803-A Form A
Duty cycle: 100% ED continuous
Insulation class: Class F
Protection: IP65 when correctly fitted with suitable DIN connector
Protective class: Class I
Voltage tolerance: ±10%
Ambient temperature: -20°C to +50°C
Construction: Thermoset resin encapsulated
Genuine nass magnet Coil Options
The following genuine nass magnet System 13/30 variants are available according to voltage and required coil specification.
12VAC 50/60Hz – 17VA
Part No. 113-030-0044
Note: Can also be operated from a 12VDC supply using an optional bridge rectifier connector.
