1/4 Brass Solenoid Valve 0–150 Bar 2/2 Normally Closed
£48.24
Description
1/4 inch high-pressure brass solenoid valve – CS Fluid Power AD8000
Compact, direct-acting 2/2 way normally closed brass solenoid valve designed for high-pressure fluid, gas and vacuum applications up to 150 bar. Ideal where zero differential pressure operation, fast response and compact installation are required.
• • •
Valve function & operation
→ Function: 2/2 way normally closed
→ Operation: Direct acting (zero rated)
→ Thread: 1/4" BSPP standard
→ Optional threads: NPT or Rc
→ Pressure range: 0 to 150 bar (orifice & coil dependent)
→ Vacuum rating: Down to 10⁻⁶ mbar
→ No minimum pressure differential required
• • •
Construction & materials
→ Body: Brass
→ Internals: Stainless steel
→ Orifice options: 1.2 / 1.6 / 2.0 / 3.0 / 4.0 / 5.0 mm
→ Kv range: 1.0 to 9.15 (water @ 1 bar ΔP)
→ Seals (standard): Viton®
→ Optional seals: EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon
→ Note: PTFE seals required for pressures above 30 bar
• • •
Media compatibility
→ Air and inert gases
→ Water
→ Light oils and fuels
→ Vacuum applications
→ Non-corrosive fluids compatible with brass and seal materials
• • •
Coil & electrical
→ Coil types:
→ WPG1: 12 W, IP67 with fitted connector DIN43650A
→ WPG2: 18 W, IP67 with fitted connector DIN43650A
→ WPAC3: 22W, IP54 30 cm lead wires
→ Duty cycle: 100% rated
→ LED connector available WPG1 & WPG2
→ Manual override available (optional)
• • •
Voltage options
→ 12V DC
→ 24V DC
→ 48V DC
→ 24V AC
→ 48V AC
→ 110V AC
→ 230V AC
→ Custom voltages available
• • •
Hazardous area option
→ ATEX Ex mb IIC T4
→ Temperature class: T4 (130°C)
→ Suitable for Zone 21 & 22 (AD80 series)
• • •
Applications
→ High-pressure pneumatic systems
→ Vacuum circuits
→ Fuel and oil control
→ Test rigs and instrumentation
→ Compact gas and fluid control systems
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: AD8000
Width: 19.00 mm
Height: 85.00 mm
Depth: 41.00 mm
Weight: 1.00 kg
Valve / Product Type: Solenoid Valve
Body Material: Brass
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 1/4 thread
Function: 2/2 Normally Closed
Operation: Direct Acting
Seals: EPDM, HNBR, NBR, PTFE (Teflon), FKM (Viton), Silicone, ECO, Hypalon
Approval: ATEX,WRAS,IP etc: ATEX Exm, IP54, IP65, CSA, UL
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Vacuum (High), Vacuum (Low), Vacuum (Medium), Water
Options required: Manual Override, Mounting Holes
Orifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm
Pressure: Vacuum, 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar, 120 Bar, 130 Bar, 135 Bar, 140 Bar, 150 Bar
Reviews
★★★★★5.0 / 5 1 reviews
Good morning team I hope you can help with a little advice I have attached a picture of a “MODEL AD-8230-C-V3-24VAC-G” that has given sterling service on a rig we use for over 10 years but is now overheating and making odd humming sounds and so needs to be replaced. The rig it works on uses an identical solenoid to allow compressed air to pass at up to 20 bar where it puts components under pressure then release the air using the solenoid pictured and repeats this for up to 1500 cycles in a session.
★★★★★Reviewed on 25/03/2021 by Stephen G
