1/8 Stainless steel solenoid valve 0-150 Bar 2/2 N/Closed
£96.47
Description
1/8 inch high-pressure stainless steel solenoid valve – CS Fluid Power ADS6000.
A compact, direct-acting 2/2 way normally closed stainless steel solenoid valve designed for high-pressure fluid and gas control applications up to 150 bar (2250 psi). Suitable for aggressive media, high-temperature environments and applications requiring corrosion resistance and reliable shut-off.
Valve function & operation
→ Function: 2/2 way normally closed
→ Operation: Direct acting (zero differential pressure)
→ Thread: 1/8″ BSPP standard
→ Optional threads: NPT or Rc
→ Pressure range: 0 to 150 bar (AC) / 0 to 105 bar (DC)
→ Vacuum rating: Down to 10⁻⁶ mbar
→ Response: Instant actuation without pilot pressure
Construction & materials
→ Body: Stainless steel (316)
→ Internals: Stainless steel
→ Orifice options: 1.2 / 1.6 / 2.0 / 3.0 / 4.0 / 5.0 mm
→ Kv flow factor: 1.0 to 9.15 (water @ 1 bar ΔP, orifice dependent)
→ Seals (standard): Viton
→ Optional seals: EPDM, NBR, Silicone, Neoprene, ECO, HNBR, Hypalon, PTFE
→ Note: PTFE seals required for pressures above 30 bar
Media compatibility
→ Air and inert gases
→ Water
→ Light oils
→ Vacuum applications
→ Aggressive and corrosive fluids compatible with stainless steel and seal materials
Coil & electrical
→ Coil types:
→ → WPG1: 12 W, IP67, DIN 43650A connector
→ → WPG2: 18 W, IP67, DIN 43650A connector
→ → WPAC3: 14.3 to 27.5 W, IP54, 30 cm flying leads
→ Duty cycle: 100% rated
→ LED connector available (WPG1 & WPG2)
→ Manual override available (optional)
Voltage options
→ 12V DC
→ 24V DC
→ 48V DC
→ 24V AC
→ 48V AC
→ 110V AC
→ 230V AC
→ Custom voltages available on request
Hazardous area option
→ ATEX Ex mb IIC T4
→ Temperature class: T4 (130°C)
→ Suitable for Zone 21 & 22 (ADS600 series)
Applications
→ High-pressure pneumatic systems
→ Vacuum circuits
→ Chemical and corrosive media control
→ Fuel and light oil control
→ Test rigs and instrumentation
→ Compact hydraulic and gas systems
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: ADS6000
Width: 19.00 mm
Height: 85.00 mm
Depth: 41.00 mm
Weight: 1.00 kg
Valve / Product Type: Solenoid Valve
Body Material: Stainless Steel
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 1/8 thread
Function: 2/2 Normally Closed
Operation: Direct Acting
Seals: ECO, EPDM, FKM (Viton), HNBR, Hypalon, NBR, Neoprene, PTFE (Teflon), Silicone, VST
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels 50cSt Max, Steam, Vacuum (Low), Vacuum (Medium), Water, Water (RO/Pure/Demin)
Orifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm
Options required: Degreased, Manual Override, Mounting Holes, Shading Ring - Silver
Approval: ATEX,WRAS,IP etc: ATEX Exm, IP54, IP65, IP66, IP67, CSA, UL
Pressure: Vacuum, 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar, 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar, 120 Bar, 130 Bar, 135 Bar, 140 Bar, 150 Bar
