Solenoid valve world

General Valves WRAS Natural Gas Valves Wizard Ball Valves Pneumatics Contact Us

Home
Other products
All spare parts

All Spare Parts

Show Sub Categories

Spare Solenoid Armature Assemblies, 2/2 way normally closed; normally open and 3/2 way with NBR, Viton, EPDM or PTFE manufactured from Brass or Stainless Steel.

Armature Assemblies for solenoid valves

DIN ISO Standard 43650A (Square), 43650B (Rectangular) + Form B + Industrial and Form C micro + Analogue Electrical Connectors with or without LED, LED+VDR, Bridge Rectifier or Bridge Rectified with LED

Electrical DIN Connectors

Shako FRL Spares: Filter Elements, Bowls + Guards, Drains, Brackets, Gauges + Plugs, Spacer Blocks and other accessories.

FRL Spares

Mounting Kits for Shako PU320 & PU300, manifolds for Shako BM520 pneumatic valves.

Manifold Mounting Kits

Protective RPE Solenoid Valve and ABVM Motor ball valve covers.

Protective Covers

Solenoid spare diaphragms and seals manufactured from NBR, EPDM , Viton and PTFE to suit available in many different sizes to fit pressure assisted, assisted lift and direct acting solenoid valves.

Seals, Diaphragms + Springs

Solenoid spare coils according to bore diameter (9mm, 10mm, 13mm, 13.2mm, 13.5mm 14.6mm, 15mm, 16mm, 16.3mm, 17.3mm, 20mm, 20.8mm), width, height, power level and voltage including Elektrogas and ATEX EExia and EExm coils.

Solenoid Coils

Filters

Price

Valve / Product Type

Air Actuated Valve0

air actuated valves that utilise a compressed air supply to operate.

AirLine Fittings + Tube0

compressed air line tubing and push to connect fittings

Angle Seat Valve0

Angle seat piston valves, air actuated globe valves.

Filters Regulators & Oilers 0

Air pressure regulator with air filter with air lubrication system. Provides stable outlet pressure whilst removing debris and 90% moisture the finally providing oil mist to lubricate downstream equipment.

Manual + Mechanical Control0

Air valves that are controlled manually and mechanically

Motor Actuated Valves0

Pressure Reducing0

Pressure reducing valves (PRV) reduce and maintain stable outlet pressure

Pressure Relief0

Safety pressure relief / pressure limiting valve (PLV), stays closed until pressure reaches set pressure - then quickly opens, releasing any excess pressure.

Pressure Sustaining0

Pressure sustaining / back pressure valve, maintains a minimum preset upstream (Inlet) pressure, valve will close if pressure drops to set pressure and reopens when inlet pressure increases again.

Proportional Modulating0

Flow regulating valves with manual or electric modulating 4-20mA control.

Safety Shut Off0

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Solenoid Valve0

Valves controlled by electrical signal via a solenoid or electro magnet.

Timed control0

Time control valves can be set to activate according to preset intervals when power is applied.

Port Size

M50

1/8 thread0

valves with 1/8 inch threaded ports

1/4 thread0

valves with 1/4 inch threaded ports

3/8 thread0

valves with 3/8 inch threaded ports

3/8 Flange DN100

1/2 thread0

valves with 1/2 inch threaded ports

1/2 inch Flange DN150

3/4 thread0

valves with 3/4 inch threaded ports

3/4 Flange DN200

1 thread0

valves with 1 inch threaded ports

1 inch Flange DN250

11/4 thread0

valves with 11/4 inch threaded ports

11/4 inch Flange DN320

11/2 thread0

valves with 11/2 inch threaded ports

11/2 inch Flange DN400

2 thread0

valves with 2 inch threaded ports

2 inch Flange DN500

21/2 thread0

valves with 21/2 inch threaded ports

21/2 inch Flange DN65 0

3 thread0

valves with 3 inch threaded ports

3 inch Flange DN80 0

4 Inch0

4 inch Flange DN100 0

5 inch Flange DN125 0

6 inch Flange DN150 0

8 inch Flange DN200 0

10 inch Flange DN2500

12 inch Flange DN300 0

14 inch Flange DN350 0

16 inch Flange DN400 0

18 inch Flange DN450 0

20 inch Flange DN500 0

Sub Base Mount0

Media

Air0

Fluid (Non Aggressive)0

Fluid (Slight Acid/Alkali)0

Fluid (Stong Acid/Alkali)0

Fluid Thick 51>500cSt0

Gases (Non Aggressive)0

Gases (Slight Acid/Alakli)0

Gases (Strong Acid/Alkali)0

Natural Gas0

Oils + Fuels 50cSt Max0

Steam0

Vacuum (Low)0

Vacuum (Medium)0

Vacuum (High)0

Water0

Water (RO/Pure/Demin)0

Body Material

Aluminium0

Brass0

Bronze0

Delrin (POM)0

Ductile Iron0

Nylon0

Polycarbonate0

Polyethylene0

Polypropylene0

PVC0

PTFE0

Steel0

Stainless Steel0

Function

2/2 Failsafe Closed0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Failsafe Open0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Latching0

2 ports (inlet/outlet) with 2 positions (Open/Closed) - short power pulse valve stays open - reverse power pulse valve stays closed

3/2 Normally Closed0

3 ports with 2 positions. Power off inlet closed, outlet open to exhaust - power on inlet open to outlet with exhaust closed.

3/2 Normally Open0

3 ports 2 positions. Inlet open to outlet with exhaust closed - power on inlet closed with outlet open to exhaust.

4/2 Way0

A 4/2 way valve has four ports and two positions. It controls the direction of flow by switching between two paths in a pneumatic or hydraulic system.

4/3 Way0

A 4/3 way valve has four ports and three positions. It controls the direction of flow by switching between two paths in a pneumatic or hydraulic system with third option all ports closed.

5/2 Single Acting0

5 ports 2 positions (1 inlet, 2 outlets, 2 exhaust ports). Power to coil Cylinder fully extends - Power off cylinder fully retracts (or visa versa)

5/2 Double Acting0

Power to left coil Cylinder fully extends, power to right coil cylinder fully retracts, power off cylinder stays put fully extended or retracted.

5/3 Way0

Power to left coil cylinder extends, power to right coil cylinder retracts, power off cylinder stays put even in a mid position.

Power Open/Power Close0

Valve requires power to open and power to close, no power valves stays in position.

Proportional / Modulating0

Valve opens proportionally according to signal input, either 4-20mA, 0-10v or 0-5 volt. Example 4mA valve closed, 8mA 25% open, 12mA 50% open, 18mA 75% open and 20mA fully open.

Pressure

Vacuum0

Vacuum products including valves, filters, regulators for vacuum and high vacuum systems down to -101Kpa.

0.02 Bar (20 mBar)0

0.02 Bar = 20 millibars = 0.29psi = 2 Kpa

0.1 Bar (100 mBar)0

0.1 Bar = 100 millibars = 1.47 psi = 1kPa

0.2 Bar (200 mBar)0

0.2 Bar = 200 millibars = 2.94 psi = 20kPa

0.3 Bar (300 mBar)0

0.3 Bar = 300 millibars = 4.41 psi = 30 kPa

0.4 Bar (400 mBar)0

0.4 Bar = 400 millibars = 4.41 psi = 40 kPa

0.5 Bar (500 mBar)0

0.5 Bar = 500 millibars = 7.36 psi = 50 kPa

0.6 Bar (600 mbar)0

0.6 Bar = 600 millibars = 8.83 psi = 60 kPa

0.7 Bar (700 mBar)0

0.7 Bar = 700 millibars = 10.3 psi = 70 kPa

0.8 Bar (800 mBar)0

0.8 Bar = 800 millibars = 11.77 psi = 80 kPa

1 Bar0

1 Bar = 1000 millibars = 14.71 psi = 100 kPa = 0.1 MPa

1.2 Bar0

1.2 Bar = 1200 millibars = 17.65 psi = 1200 kPa = 0.12 MPa

1.3 Bar0

1.3 Bar = 1300 millibars = 19.12 psi = 1300 kPa = 0.13 MPa

1.4 Bar0

1.4 Bar = 1400 millibars = 20.59 psi = 1400 kPa = 0.14 MPa

1.5 Bar0

1.5 Bar = 1500 millibars = 22.07 psi = 1500 kPa = 0.15 MPa

1.6 Bar0

1.6 Bar = 1600 millibars = 23.54 psi = 1600 kPa = 0.16 MPa

2 Bar0

2 Bar = 2000 millibars = 29.42 psi = 2000 kPa = 0.2 MPa

2.5 Bar0

2.5 Bar = 2500 millibars = 36.78 psi = 2500 kPa = 0.25 MPa

3 Bar0

3 Bar = 3000 millibars = 44.13 psi = 3000 kPa = 0.3 MPa

3.5 Bar0

3.5 Bar = 3500 millibars = 51.49 psi = 3500 kPa = 0.35 MPa

4 Bar0

4 Bar = 4000 millibars = 58.84 psi = 4000 kPa = 0.4 MPa

4.5 Bar0

4.5 Bar = 4500 millibars = 66.20 psi = 4500 kPa = 0.45 MPa

5 Bar0

5 Bar = 5000 millibars = 73.55 psi = 5000 kPa = 0.5 MPa

5.5 Bar0

5.5 Bar = 5500 millibars = 80.91 psi = 5500 kPa = 0.55 MPa

6 Bar0

6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa

6.5 Bar0

6.5 Bar = 6500 millibars = 95.62 psi = 6500 kPa = 0.65 MPa

7 Bar0

7 Bar = 7000 millibars = 102.97 psi = 7000 kPa = 0.7 MPa

7.5 Bar0

7.5 Bar = 7500 millibars = 110.33 psi = 7500 kPa = 0.75 MPa

8 Bar0

8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa

8.5 Bar0

8.5 Bar = 8500 millibars = 125.04 psi = 8500 kPa = 0.85 MPa

9 Bar0

9 Bar = 9000 millibars = 132.39 psi = 9000 kPa = 0.9 MPa

10 Bar0

10 Bar = 147.1 psi = 1 MPa

12 Bar0

12 Bar = 176.52 psi = 1.2 MPa

13 Bar0

13 Bar = 191.23 psi = 1.3 MPa

14 Bar0

14 Bar = 205.94 psi = 1.4 MPa

15 Bar0

15 Bar = 220.65 psi = 1.5 MPa

16 Bar0

16 Bar = 235.36 psi = 1.6 MPa

17 Bar0

17 Bar = 250.07 psi = 1.7 MPa

18 Bar0

18 Bar = 264.78 psi = 1.8 MPa

20 Bar0

20 Bar = 294.2 psi = 2 MPa

25 Bar0

25 Bar = 367.8 psi = 2.5 MPa

30 Bar0

30 Bar = 441.3 psi = 3 MPa

35 Bar0

35 Bar = 514.9 psi = 3.5 MPa

40 Bar0

40 Bar = 588.4 psi = 4 MPa

50 Bar0

50 Bar = 735.5 psi = 5 MPa

60 Bar0

60 Bar = 882.6 psi = 6 MPa

100 Bar0

100 Bar = 1471 psi = 10 MPa

150 Bar0

150 Bar = 2206.5 psi = 15 MPa

Seals

CR0

CR or Chloroprene, excellent resistance to weathering, ozone, heat, oil, and various chemicals. -40°C to +121°C

ECO0

ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C

EPDM0

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)0

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

HNBR0

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

Hypalon0

Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.

NBR0

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Neoprene0

Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.

PTFE (Teflon)0

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Silicone0

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

VST0

VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C

Voltage

3vDC0

3 volts Direct Current for 2x 1.5v AA batteries

6vDC0

6 volts Direct Current

12vDC0

12 volts Direct Current

12vAC0

12 volts 50/60Hz Alternating Current

24vDC0

24 volts Direct Current

24vAC0

24 volts 50/60Hz Alternating Current

36vAC0

36 volts 50/60Hz alternating current

48vAC0

48 volts 50/60Hz alternating current

48vDC0

48 volts Direct Current

110vAC0

110 volts 50/60Hz Alternating Current

110vDC0

110 volts Direct Current

125vDC0

125 volts Direct Current

230VAC0

230 volts 50/60Hz Alternating Current

200vDC0

200 volts Direct Current

380vAC0

380 volts 50/60Hz Alternating Current

Approval: ATEX,WRAS,IP etc

ATEX Exm0

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

ATEX Exd0

ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil

ATEX Exia0

ATEX protection by intrinsic safety, II 2 G Ex ia IIB/IIC T4 or T6.

IP400

Protected against solid foreign objects of 1mm diameter and more and no protection against water ingress.

IP540

Dust protected and protected against splashing water

IP650

Dust tight and protected against water jets

IP660

Dust protected and protected against powerful water jets.

IP670

Dust protected and protected against immersion in water

IP680

Dust protected and protected against the effects of continuous immersion in water.

CSA0

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

EN12021 Breathing Air0

EN12021 approval certifies compressed air quality for breathing apparatus, ensuring it meets safety standards for human respiratory use.

EN1610

EN161 approval is a European standard for gas safety shut-off valves, ensuring they meet specified safety and performance criteria.

UL0

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

WRAS0

WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.

Orifice

0.6mm0

Valve orifice or sealing face with diameter 0.6mm

0.8mm0

Valve orifice or sealing face with diameter 0.8mm

1.0mm0

Valve orifice or sealing face with diameter 1mm

1.2mm0

Valve orifice or sealing face with diameter 1.2mm

1.3mm0

Valve orifice or sealing face with diameter 1.3mm

1.5mm0

Valve orifice or sealing face with diameter 1.5mm

1.6mm0

Valve orifice or sealing face with diameter 1.6mm

2.0mm0

Valve orifice or sealing face with diameter 2mm

2.3mm0

Valve orifice or sealing face with diameter 2.3mm

2.4mm0

Valve orifice or sealing face with diameter 2.4mm

2.5mm0

Valve orifice or sealing face with diameter 2.5mm

3.0mm0

Valve orifice or sealing face with diameter 3mm

4.0mm0

Valve orifice or sealing face with diameter 4mm

5.0mm0

Valve orifice or sealing face with diameter 5

6.0mm0

Valve orifice or sealing face with diameter 6mm

8.0mm0

Valve orifice or sealing face with diameter 8mm

10mm0

Valve orifice or sealing face with diameter 10mm

13mm0

Valve orifice or sealing face with diameter 13mm

15mm0

Valve orifice or sealing face with diameter 15mm

20mm0

Valve orifice or sealing face with diameter 20mm

25mm0

Valve orifice or sealing face with diameter 25mm

32mm0

Valve orifice or sealing face with diameter 32mm

38mm0

Valve orifice or sealing face with diameter 38mm

40mm0

Valve orifice or sealing face with diameter 40mm

50mm0

Valve orifice or sealing face with diameter 50mm

65mm0

Valve orifice or sealing face with diameter 65mm

80mm0

Valve orifice or sealing face with diameter 80mm

125mm0

Valve orifice or sealing face with diameter 125mm

150mm0

Valve orifice or sealing face with diameter 150mm

200mm0

Valve orifice or sealing face with diameter 200mm

250mm0

Valve orifice or sealing face with diameter 250mm

300mm0

Valve orifice or sealing face with diameter 300mm

350mm0

Valve orifice or sealing face with diameter 350mm

400mm0

Valve orifice or sealing face with diameter 400mm

450mm0

Valve orifice or sealing face with diameter 450mm

500mm0

Valve orifice or sealing face with diameter 500mm

Operation

Assisted Lift0

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting0

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted0

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Anti Water Hammer0

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow0

Can control flow in both directions

Degreased0

Oil and grease removed typically for oxygen or paint spray use.

Flow Control0

Flow regulation to control the amount of flow.

Manifold0

A group of multiple valves together on one manifold, simple layout streamline control and space saving.

Manual Control0

Valves that require manual input to operate such as lever, button or switch

Manual Override0

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Bracket0

Valve has the facility to be supplied with a bracket for mounting and securing.

Mounting Holes0

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Position Feedback Closed0

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed0

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position indication Visual 0

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Shading Ring - Silver0

The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.

Shading Ring - without0

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Y Pattern0

A Y-pattern valve is a valve with a Y-shaped body design, typically used for high-pressure applications to reduce pressure drop and turbulence, often found in steam systems.

Spares (Coils, Connectors, Seals)

Actuator Head Air + Motor0

Air Actuator0

Armature Assembly0

Blanking Plug0

Coil bore 7mm0

Coil bore 9mm0

Coil bore 10mm0

Coil bore 12mm0

Coil bore 13mm0

Coil bore 14mm0

Coil bore 15mm0

Coil bore 16mm0

Coil bore 17mm0

Coil bore 18mm0

Coil bore 20mm0

Coil bore 20mm+0

Coil Commisioning Magnet0

DIN connector Form A0

DIN connector Form B Industrial0

DIN connector Form B0

DIN connector Form C0

Fittings0

FRL Spares (Bowls filters etc)0

Manifold0

Mounting Bracket0

Nuts + bolts + plates0

Position switch0

Pressure Gauge0

Pressure reducing controller0

Pressure relief controller0

Pressure sustaining controller0

Seals0

Springs0

Valve Cover0

Only Show Items In Stock

Hide spare parts

Showing 1 - 20 of 216 total products

Solenoid valve commissioning / over ride magnet 10 15 18mm £59.90 £19.80 inc VAT

361 IN STOCK

Breathing Air Filter Element Set 5µ + Coalescing + Carbon £59.90 £38.94 inc VAT

44 IN STOCK

Solenoid Coil Core 14.6mm, H 42mm, W 30mm, L 39mm 15W IP65 £42.86 £30.00 inc VAT

9486 IN STOCK

Sustainably Crafted Bamboo Brain Teaser Ball Puzzle £0.00 £11.99 inc VAT

CLEARANCE

12 IN STOCK

M5-1/2 BSPP Male Brass blanking plugs O ring seal 0-10 Bar £0.78 £0.78 inc VAT

44 IN STOCK

Sustainably Crafted Bamboo Brain Teaser Barrel Puzzle £0.00 £11.99 inc VAT

CLEARANCE

26 IN STOCK

Solenoid Coil Core 16mm, H40.5mm, W41.5mm, L59mm 18W IP68 £38.95 £31.58 inc VAT

279 IN STOCK

Emergency Electrical STOP Button Open Close Switch 400v 10A £24.34 £10.86 inc VAT

390 IN STOCK

Plunger / seal kit for JA stainless steel 2/2 solenoid valve £10.30 inc VAT

146 IN STOCK

Electrical DIN Connector 2P+E Form A LED PG9 (6-8mm) IP67 £5.33 £3.86 inc VAT

1218 IN STOCK

Solenoid coil core 9/8mm, H 29.5mm, W 22mm, L 28.8mm 4.5W £14.21 £13.19 inc VAT

2059 IN STOCK

1/8, 1/4, BSP Male Hex blanking plugs nickle plated brass £0.43 inc VAT

230 IN STOCK

Sustainably Crafted Bamboo Brain teaser cube snake puzzle £0.00 £14.40 inc VAT

CLEARANCE

67 IN STOCK

Sustainably Crafted Bamboo Brain Teaser Star Puzzle £0.00 £11.99 inc VAT

CLEARANCE

71 IN STOCK

Solenoid Coil Core 16.1mm, H 50mm, W 37.5mm, L 39mm 26W £38.95 £31.02 inc VAT

212 IN STOCK

Solenoid valve commissioning magnet (40KG Pull) 20mm Bore £97.42 £43.20 inc VAT

12 IN STOCK

Sustainably Crafted Bamboo Brain teaser curved Cube snake £0.00 £14.40 inc VAT

CLEARANCE

11 IN STOCK

Electrical Connector 2P+E Form A PG9 0-250v IP65 NO Circuit £1.30 £1.06 inc VAT

2379 IN STOCK

Solenoid Coil Core 14.6mm, H 42mm, W 36mm, L 45mm 18.5W IP65 £52.80 £38.71 inc VAT

672 IN STOCK

Solenoid Coil Core 10mm, H 29.7mm, L 27.5mm, W 22mm 5.5W £21.68 £15.98 inc VAT

77 IN STOCK

1
2
3
4
...
10
Last

Contact

08:00 - 17:30

Contact Us

Address

Unit 3, Rainbow Court
Armstrong Way
Great Western Business Park
Yate, Bristol, BS37 5NG
United Kingdom
[email protected]

My Account

Login Orders Register

Company

About Us Returns Payment Options FAQs

Quick Links

ATEX Valves Search by Brand Breathing Air Filters High Pressure Valves Clearance Items WRAS Valves New Products Information Chemical Compatibility Guide

Members of the British Valve and Actuator Association Site Verified by Security Metrics

Trademark of Connexion Developments Ltd

#UK00003734167

Privacy Policy Terms & Conditions Cookie Policy

© 2026 Connexion Developments Ltd, All rights reserved.