Key Features
✓ 1/4" BSP Forged Brass Body
✓ 2/2 Way Normally Closed
✓ Direct Acting Zero Pressure
✓ No Minimum Pressure Required
✓ Up to 16 Bar AC Pressure
✓ Up to 10 Bar DC Pressure
✓ Suitable for Vacuum Service
✓ Compact Direct Acting Design
✓ Fast Direct Acting Response
✓ 1.5mm Valve Orifice
✓ Medium Pressure Flow Design
✓ NBR Seal as Standard
✓ FKM, EPDM or HNBR Options
✓ -10°C to +90°C Fluid Range
✓ 100% Continuous Duty Coil
✓ Low Power AC 6VA / DC 4.8W
✓ Class F Coil Insulation
✓ IP65 DIN Electrical Connection
✓ BSP or Optional NPT Thread
✓ Optional ATEX / IECEx Coil
✓ ATEX Zone 1 Gas / Zone 21 Dust
Datasheets
1/4" Brass Solenoid Valve 0-16 Bar 2/2 Way Normally Closed
£33.47 incl. VAT £27.89 ex. VAT
-27% Was £45.64 incl. VAT
Description
1/4" 16 Bar Brass Solenoid Valve – SHAKO PU220AR-022
The SHAKO PU220AR-022 is a compact 1/4" 2/2 way normally closed direct acting brass solenoid valve designed for medium-pressure control of compressed air, water, light oils and compatible neutral fluids.
Featuring a 1.5mm orifice and direct acting operation, the PU220AR-022 requires no minimum pressure differential and operates from 0 to 16 Bar with an AC coil or 0 to 10 Bar with a DC coil. This provides an excellent balance between pressure capability and flow performance while retaining compact zero-pressure operation.
The forged brass construction and low-power coil make the PU220AR-022 particularly suitable for OEM equipment, control panels, pneumatic systems, laboratory equipment and medium-pressure industrial fluid control.
Available with NBR, FKM (Viton), EPDM or HNBR seals and optional ATEX / IECEx explosion-protected solenoid operators, the valve can be configured for a wide range of industrial applications.
Valve Function & Operation
Function: 2/2 way normally closed
Operation: Direct acting
Port size: 1/4" BSP
Optional thread: NPT
Orifice: 1.5mm
The direct acting construction operates from zero pressure differential and does not rely upon upstream pressure to open or close the valve.
The 1.5mm orifice provides increased pressure capability compared with the standard PU220AR-02 while retaining greater flow potential than the smaller-orifice high-pressure version.
Pressure & Temperature
AC pressure range: 0 to 16 Bar
DC pressure range: 0 to 10 Bar
Minimum pressure differential: 0 Bar
Fluid temperature: -10°C to +90°C
Ambient temperature: -10°C to +60°C
Maximum operating pressure may vary according to voltage, coil and application conditions.
Construction & Materials
Body: Forged brass
Internals: Stainless steel
Orifice: 1.5mm
Standard seal: NBR
Optional seals:
✓ FKM (Viton)
✓ EPDM
✓ HNBR
Installation: Any direction
Recommended installation: Horizontal
Net weight: Approximately 255g
Seal & Media Selection
Correct seal selection is important when using the PU220AR-022 with different fluids.
NBR:
✓ Air
✓ Water
✓ Neutral gases
✓ Mineral oil
FKM (Viton):
✓ Fuel oil
✓ Gasoline / petrol
✓ High-test gasoline
✓ Diesel fuel
EPDM:
✓ Air
✓ Water
✓ Gear oil
✓ Engine oil
HNBR:
✓ Hot water
✓ Detergent liquids
Always confirm chemical and temperature compatibility of the selected seal and valve materials before use with fuels, gases, oils or specialist process fluids.
Flow Performance
Orifice size: 1.5mm
The 1.5mm orifice provides a useful compromise between flow capacity and increased operating pressure, allowing the PU220AR-022 to operate at pressures up to 16 Bar with an AC coil.
This makes the valve particularly suitable where the greater pressure capability of a medium-pressure valve is required without moving to the smallest high-pressure orifice.
Coil & Electrical
Coil type: DIN
AC power consumption: 6VA
DC power consumption: 4.8W
Duty cycle: 100% ED
Insulation: Class F
Protection: IP65 with connector fitted
Voltage tolerance: ±10%
Standard voltages include:
✓ 110V AC
✓ 220–230V AC
✓ 24V DC
Other AC and DC voltages are available as options.
ATEX / IECEx Coil Option
An optional Nass Magnet System 8/22 explosion-protected solenoid operator is available for hazardous-area applications.
✓ Ex mb IIC T4 Gb
✓ Ex mb tb IIIC T130°C Db
✓ Zone 1 gas / Zone 21 dust
✓ ATEX Category 2G / 2D
✓ Gas Group IIC
✓ Dust Group IIIC
✓ IP65 protection
✓ 100% continuous duty
✓ Ambient -20°C to +50°C
✓ Maximum media temperature +80°C
✓ ATEX PTB 00 ATEX 2001 X
✓ IECEx PTB 05.0006X
✓ ATEX Directive 2014/34/EU
Special Options
✓ NPT thread option
✓ FKM seal option
✓ EPDM seal option
✓ HNBR seal option
✓ Alternative coil voltages
✓ Optional LED connector
✓ Optional timer control
✓ ATEX / IECEx coil option
Typical Applications
✓ Medium-pressure pneumatics
✓ Gas monitoring systems
✓ Gas sampling equipment
✓ Industrial control panels
✓ Compact valve manifolds
✓ OEM machinery
✓ Laboratory equipment
✓ Test and measurement equipment
✓ Water control systems
✓ Vacuum control applications
✓ General industrial automation
Compact Medium-Pressure Design
The SHAKO PU220AR-022 combines a compact forged brass body with direct acting zero-pressure operation and increased pressure capability for medium-pressure fluid control applications.
Unlike pressure-assisted diaphragm valves, the PU220AR-022 does not require upstream pressure to operate. Energising the solenoid directly operates the internal plunger, providing quick response from zero pressure differential.
Its 1.5mm orifice provides a useful balance between flow and pressure capability, allowing operation up to 16 Bar with an AC coil and up to 10 Bar with a DC coil while retaining the compact dimensions of the PU220AR Series.
This makes the PU220AR-022 particularly useful where the standard PU220AR-02 does not provide sufficient pressure capability but maximum high-pressure operation is not required.
A choice of NBR, FKM, EPDM and HNBR sealing materials allows the valve to be configured for different media and temperature requirements, while optional explosion-protected ATEX / IECEx coils extend its use to suitable hazardous-area installations.
Ordering Information
Select the required seal material, thread, voltage and electrical option before adding the valve to your basket.
Available options include:
✓ 1/4" BSP thread
✓ Optional 1/4" NPT thread
✓ NBR, FKM, EPDM or HNBR seals
✓ AC and DC voltage options
✓ Optional LED connector
✓ Optional timer control
✓ Optional ATEX / IECEx coil
For fuels, gases, oxygen or unusual process media, contact us before ordering so that material compatibility and the correct valve configuration can be confirmed.
Related Products & Categories
Technical Specification
Brand: Shako Co Ltd
Model: PU220022AR
Width: 25.40 mm
Height: 75.00 mm
Depth: 35.00 mm
Weight: 0.30 kg
Valve / Product Type: Solenoid Valve
Body Material: Brass
Voltage: 110vAC, 110vDC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC, 6vDC
Port Size: 1/4 thread
Function: 2/2 Failsafe Closed
Operation: Direct Acting
Pressure: 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar
Seals: EPDM, HNBR, NBR, FKM (Viton)
Approvals:: ATEX Exm, IP65
Media: Air, Fluid (Non Aggressive), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Water
Options required: Mounting Holes
Orifice: 1.5mm
Found in these Categories
- Solenoid Valves by Pressure (Bar)
- 1/4 Brass Solenoid Valves
- Shako PU220 Brass Solenoid Valves
- Brass 2/2 Normally Closed - Direct Acting
- Air Solenoid Valves
- Water Solenoid Valves
- Light Oil Solenoid Valves
- Fuel Solenoid Valves
- Oxygen Solenoid Valves
- 1/4 Inch Solenoid Valves
- 10 Bar Solenoid Valves
- 2/2 Normally Closed Solenoid Valves
- ATEX Ex m Encapsulation
- 2/2 Normally Closed - Zero Rated
- 1/4" BSP General Solenoid Valves
- Brass Solenoid Valves by Port Size
- General Purpose Solenoid Valves
- Solenoid Valves
- Brass Solenoid Valves