Key Features

✓ WRAS approved EPDM seals
✓ WRAS Approval 2304324
✓ 2/2 way normally closed
✓ Pressure-assisted diaphragm
✓ Anti-water-hammer design
✓ Approx. 3 sec open / close
✓ Large 50mm orifice
✓ Kv flow 580 L/min
✓ 0.5–10 Bar differential
✓ 15 Bar maximum working pressure
✓ Forged brass body
✓ Stainless steel internals
✓ -5°C to +130°C media
✓ IP65 coil & connector included
✓ Class H 180°C coil insulation
✓ 100% continuous duty
✓ AC & DC voltage options
✓ Optional ATEX / IECEx coil
✓ Optional low-power 24VDC connector
✓ Suitable for priority demand systems
✓ Suitable for sprinkler systems
✓ Replacement seals & coils available
✓ Free UK delivery

2″ Water Solenoid Valve 0.5-15 Bar WRAS 2/2 Normally Closed

£331.93 incl. VAT £276.61 ex. VAT

-35% Was £510.66 incl. VAT

Brand: Shako Co Ltd

Model: PU225D20

Stock: 101 in stock

Read Full Description

Description

2" WRAS Approved Water Solenoid Valve – Normally Closed


WRAS Approved SHAKO Brass Water Solenoid Valve for Potable Water

The SHAKO PU225D-20 is a 2" WRAS approved brass solenoid valve designed for potable water, priority demand, sprinkler and high-flow water control applications.

This 2/2 way normally closed, pressure-assisted diaphragm valve features an anti-water-hammer design with approximately 3-second opening and closing time to help reduce hydraulic shock in large-bore pipework. The large 50mm orifice provides a high Kv flow factor of 580 L/min, making it particularly suitable for commercial and industrial water systems requiring high flow capacity.

Suitable for potable water, water treatment, OEM equipment, sprinkler and priority demand applications where a minimum 0.5 Bar pressure differential is available.

Typical Applications

Potable water systems
Priority demand valve systems
Fire sprinkler installations
Water treatment equipment
Commercial building water control
Industrial water management
OEM machinery
Process water systems
Large-bore water shut-off systems

Technical Specification

Function: 2/2 way normally closed
Fail Position: Closed when de-energised
Operation: Pressure-assisted diaphragm
Design: Anti-water-hammer
Port Size: 2" BSPP female
Optional Thread: NPT
Orifice Size: 50mm
Kv Flow Factor: 580 L/min based on water with 1 Bar pressure drop
Minimum Differential Pressure: 0.5 Bar
Operating Differential: 0.5 to 10 Bar
Maximum Working Pressure: 15 Bar
Open / Close Time: Approx. 3 seconds
Body Material: Forged brass
Internal Components: Stainless steel
Seal Material: WRAS approved EPDM
Suitable Media: Water
Maximum Media Viscosity: 50 cSt
Media Temperature: -5°C to +130°C
Ambient Temperature: -20°C to +60°C
Installation: Coil upright

Coil & Electrical Specification

Coil: Nass Magnet system
Coil Power: 15 Watts DC
AC Power: 23VA inrush / 17VA holding
Insulation Class: Class H 180°C
Duty Rating: 100% continuous duty
Protection Rating: IP65 with connector
Electrical Connection: DIN 43650A
Connector: Included

Voltage Options

DC: 12V, 24V, 48V, 110V or 220V
AC 50/60Hz: 12V, 24V, 48V, 110V, 220–240V or 380V

ATEX / IECEx Coil Option

Optional Nass Magnet explosion-protected solenoid operator available.
✓ Ex mb IIC T4 Gb
✓ Ex mb tb IIIC T130°C Db
✓ Suitable for Zone 1 gas and Zone 21 dust
✓ ATEX Category 2G / 2D
✓ Protection rating: IP65
✓ Maximum media temperature: +80°C
✓ ATEX Certificate: PTB 03 ATEX 2086 X
✓ IECEx Certificate: IECEx PTB 05.0005X
✓ ATEX Directive: 2014/34/EU

WRAS Approval

EPDM seals and gaskets are WRAS approved for potable water applications.
WRAS Approval: 2304324

Additional Information

The large 50mm orifice, Kv 580 L/min flow capacity and approximately 3-second anti-water-hammer operation make the PU225D-20 particularly suitable for priority demand water control, sprinkler installations and large commercial or industrial water systems.
HS Code: 84818030

Related Products & Categories


2" Brass Solenoid Valves



Replacement Solenoid Coils

Heat & Power Reducing Connectors

WRAS Approved Motor Ball Valves
View Technical Specification

Technical Specification

Brand: Shako Co Ltd

Model: PU225D20

Width: 112.00 mm

Height: 160.50 mm

Depth: 160.00 mm

Weight: 4.67 kg

Valve / Product Type: Solenoid Valve

Body Material: Brass

Port Size: 2 thread

Function: 2/2 Failsafe Closed

Operation: Pressure Assisted

Seals: EPDM

Approvals:: ATEX Exm, IP65, WRAS

Media: Water

Options required: Anti Water Hammer

Orifice: 50mm

Pressure: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar

Voltage: 6vDC, 12vDC, 24vDC, 24vAC, 36vAC, 48vAC, 48vDC, 110vAC, 110vDC, 230VAC, 200vDC, 380vAC

We use a few optional cookies to see how our adverts and site perform. Details